An elasticised internal sleeve to accommodate the water reservoir.
One zipped internal pocket 14cm or 5 1/2" deep by 17cm or
6 1/2" wide.
Two elasticised external mesh pockets either side of the Yalu, 17cm or
6 1/2" deep by 9cm or 3 1/2" wide.
One front pocket measuring 27cm or 10 1/2" deep by 19cm or 7 1/2" wide.
On the front sleeve pocket measuring 27cm or 10 1/2" deep by 19cm or 7 1/2" wide.
One elasticised external mesh pocket measuring 19cm or 7 1/2" deep by
19cm or 7 1/2" wide.
On the very front of the backpack, elastic cord to externally secure more
gear to this backpack.
A 3M reflective strip below the front pocket to enhance visibility at
night.
Four external compression straps, including the lower stabiliser straps
on the padded hip belt.
A padded hip belt with a 50mm side release buckle, and lower stabiliser straps to secure the backpack
to the body.
An internal HDPE Sheet to protect your back, with a single internal stave
that allows customising to the individual back.
Longer than usual shoulder straps, so that the backpack can sit comfortably
in the small of the back for better weight distribution, with sternum strap.
A webbing top carry handle, or haul loop.
A water reservoir hose keeper with multiple positioning.
Padding and insulation on the front and back of this backpack.
A 2.7 litre water (Billabong) reservoir included.
The Yalu is constructed from 450D Rip-Stop Nylon & 450D Nylon. All fabric
for White Mountain™ Backpacks is manufactured by Kolon Int. in Korea, a highly
reputable and leading world fabric manufacturer that produces high quality synthetic
materials.